If the weather forecast is calling for a severe cold snap, you may be worried about how well your home's old windows are going to keep the frigid air from running up your energy bill. The following homemade methods for insulating your windows will provide you with a cheap and easy way to keep your house warmer.
Tape Bubble Wrap To The Glass
Bubble wrap is not just for popping when you are bored. It also acts as an effecting insulator by trapping warm air between the bubbles, providing a barrier between the outside and inside air when placed on your windows. Also, it will still allow light to shine through since it is clear.
Depending on the size of your windows, you can use pieces of bubble wrap you have lying around or you can buy a roll at an office supply store. If possible, use the wrap that has the larger bubbles. These will contain twice as much air and will give you a thicker layer of warmth.
Two-inch clear packing tape works best for this project because it is waterproof and will not be as noticeable. It is also easier to remove when you are ready to take down the insulation.
You will also need a measuring tape, a marking pen, and a sharp pair of scissors.
Measure each glass pane. Then, mark the measurements on the bubble wrap, adding one inch to each side to give you enough to cover the frames. Cut out each piece and set them aside in the order you will be working with each.
Place a piece of wrap on its corresponding pane with the bubble side down. This will create the air pockets that will provide the insulation. Then, cut a piece of tape that extends the full width of the top to attach the wrap to the window frame.
Repeat until all sides are fully covered, making sure there are no gaps or holes where air can escape through. Continuing doing the steps above until all of your windows are covered with the bubble wrap.
Use Newspaper As Insulation
The paper from which newspapers are made contains heavy, dense fibers. These fibers block air flow and create a great cold weather insulator for your windows.
If you choose this method, use the non-glossy paper that is used for the actual newspaper instead of the shiny ones for ads. These are printed on more porous paper and will not work as well.
You will need enough newspaper to cover each window pane twice. This will provide a pocket of warm air to buffer against the cold. You will also need two-inch packaging tape, a measuring tape, a marking pen, and scissors.
Measure each individual pane and mark the newspaper, adding a half inch to each side. Cut out a panel for each pane, setting them aside.
For each window pane, place the first piece of paper over the glass and tape the sides. Then, place the second piece over the first and tape it in the same way.
Continue doing the above until the entire window has been done. For an extra layer of insulation, place another piece of newspaper over the entire window and secure it with the tape. If you have to use more than one piece, remember to also tape the seams.
Repeat the above until all of your windows have been covered with newspaper.
The above insulation methods will give you quick and inexpensive options for keeping your house warmer during bitterly cold weather. However, if you want a more permanent solution, you may want to speak with a contractor like http://www.randkaz.com about having your house windows replaced with newer, more energy efficient ones.