Why You Shouldn't Consider Cost When Shopping For A New Furnace

If you plan to buy and install a new furnace in your home, you may want to choose one that costs a little more than you wish to spend on it. Sometimes, the most effective and beneficial way to lower your annual heating expenses is to take costs out of the equation completely. Although this isn't always the case, furnaces that cost less to purchase may actually turn out to more expensive in the long run. Here are some reasons why you shouldn't consider costs when buying a new furnace.

A Cheaper Furnace May Cost More to Repair

A cheaper furnace may operate efficiently at first but later break down due to mechanical, operational or heating problems. If you're on a monthly budget, these problems may throw you for a loop. The least expensive heating appliance may cost more to repair than a higher-priced appliance.

Service calls and maintenance repairs can add up, especially if you need them every year. Though this isn't true for all low-cost heating appliances, some can become burdens instead of assets if they don't work properly. Because some regions in the United States experience very cold temperatures during the winter, a non0functioning heating device can be very dangerous for your family and pets.

For example, a room without sufficient heat may experience cold drafts. These cold drafts can bring on cold and flu illnesses that make your family sick and unhealthy.

To avoid this problem and potential breakdowns, choose a furnace with:

  • A 2-speed motor: This motor puts out more heat without over-straining the appliance because it has twice the power to operate
  • Better heat condensing: This feature allows your furnace to process heat faster and better than a cheaper and low-efficiency one. It also lasts longer and requires less energy to operate.
  • Corrosion-resistant parts: These parts withstand excessive moisture and heat because they come coated with galvanized steel or nickel-based materials that ward off condensation

The above features describe just a few of what you need to look for in a quality furnace. In addition, you want your furnace to be energy-efficient.

A Cheaper Furnaces May Use More Energy to Heat Your Home

Keeping your heating costs down every winter not only saves you money, it prolongs the life of your furnace. A furnace that uses more electric or gas to perform may not last long. This happens if it constantly puts out more heat than your home actually needs to stay comfortable. As a result, you spend more money on repairs.

The furnace you choose to install may also come with the energy-efficient features the United States government recommends for every home. These recommendations may include having:

An AFUE Of 78 Percent or Higher in the Home

AFUE, or annual fuel utilization efficiency, describes the amount of heat your appliance uses to heat the home and how much of this heat escapes out into the outdoor environment. A higher-quality furnace may come with a larger AFUE percentage than a lower-cost model.

A Long-term Maintenance Warranty 

Keeping your appliance properly maintained before it has a chance to break down is one of the best ways to lower your energy costs. Routine maintenance can locate potential hazards that may decrease or increase the energy output of your furnace. By purchasing or obtaining a long-term maintenance warranty for your appliance, you're more likely to have it checked when needed.

A Motor with Different Speeds

This may not seem like it can save you energy or money, but purchasing a furnace with a varied speed motor can actually do both. A furnace should change how hard or soft it blows hot air through your home based on the temperatures outdoors and in. If your furnace's motor blows a constant temperature, it may use more energy than it needs to.

These features may costs more to obtain in the beginning, but they can pay off for the life of your appliance. They may eliminate costly repairs and poor energy performance.

If you're ready to choose the best heating appliance for your home regardless of costs, consult with an installation specialist for assistance. He or she can help you find the right furnace in no time. Click here for info

About Me

Home Renovation Expectations: Knowing What's To Come

When I bought my first house, I did it with the expectation of needing to do some remodeling. I wasn't, however, prepared for how complex the renovation process was. From upgrading the retaining walls to adding cosmetic features like the stone patio, I was inundated with decisions to make and materials to select. I wished that I had known how much was involved from the beginning so that I could be better prepared. That's when I decided to use what I'd learned to help others better prepare for their own remodeling projects. I hope the information here helps you to see what you can expect as you get ready to expand your property or renovate the existing space.

Search

Archive

Latest Posts

21 April 2016
When it comes to choosing new lights for your kitchen remodel, there are many things that you need to consider. After all, the lights in your kitchen

21 October 2014
If you live in a northern climate, you probably don't have central air or a system that combines both heating and cooling in the same unit. It is comm

21 October 2014
Cities and communities across America are looking for ways to cut utility costs and improve air quality. The emergence of the living roof-- a roof fin