Maintaining the sewer drains, lines and cleanouts is a joint effort between you and your city's utility department. Your city has full responsibility for repairs of lines and equipment at street level, while you need to perform the work on sewer components located on your land. Although work required on your property is your responsibility, you still need to receive permission from the city to make the repairs. The explicit permission for companies like http://www.drainorooter.com comes in the form of a permit, which requires an application and approval. Here are four sewer projects that require an approved permit.
Storm Drain Install
A properly located and installed storm drain evacuates rainwater from your yard before it can accumulate. Large pools of rainwater can damage your yard and foundation of your home if it doesn't drain away in a timely manner. You can install a secondary storm drain on your property if water in your yard doesn't freely flow to the ones installed curbside.
You must have a sewer installer perform a thorough inspection to find the best location for the storm drain. Upon locating the ideal location, fill out the permit application using the exact coordinates of the intended drain spot. City sewer workers may come by to confirm your technician's findings before granting permission for the work to begin.
Sewer Line Replacement
You have several large sewer lines running from your home's plumbing lines to the main pipes underneath the street. The sewer lines running between these entities are called the side sewer pipes. Since these pipes are located on your property, necessary repairs are your responsibility to complete.
Severe storms, land shifts and heavy vehicles can all displace the pipes, resulting in serious cracks or splits. If this happens, the pipes will begin leaking sewage into your yard. The permit for this job allows you to replace the components with exact replicas to restore the pipe's ability to push waste to the main sewer lines.
Plumbing Pipe Additions
If you're installing a new bathroom, laundry room or kitchen addition, you'll need to obtain permits for the plumbing portion of that job. All of the pipes in these rooms connect to the side sewer line that runs to the main pipes. You must have a professional make sure your side and main sewer lines can handle additional output from your home.
After confirming the pipes will not overload the system, you'll need to apply for a permit that gives you permission to connect your plumbing to the main lines. You may need to have the side sewer lines replaced with bigger pipes if your output exceeds their current rating.
Sewer Cleanout Install
If your home has frequent clogs that extend down to the main sewer line, you may need to have cleanout assemblies installed in the side sewer. You'll need to have the slope of your yard measured by a professional to find the best spot for the cleanouts. Just before the main clog area is usually the best spot if the ground is slightly sloping downward at that point.
Otherwise, the cleanout should be installed further up the line toward your home's main plumbing lines. The permit will allow you to bring in excavating equipment to pull up the side sewer lines. You will also receive permission to cut out a piece of the line and replace it with the cast iron cleanout apparatus.
Getting The Job Done
Although it is tempting, do not commence working without a permit. All work not backed up with a permit is subject to removal and hefty fines. The permit process is quick and easy, especially when you have your sewer repair tech complete the job.
You may need to wait about a week to receive the permit, so have your tech start the application well before your intended job start date. Once you receive the permit, you are free to begin and complete the work at hand. If you come across additional problems, you will need to add them to the permit or secure a new permit before starting those repairs as well.